1 / 1
Adapter for Intex Sand Pump to 1.5in backwash hose
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter from the pump waste port to a 1.5" backwash hose.
- Ocena
- 5 / 5
- Polubienia
- 55
- Pobrania
- 382
- Wydruki
- 0
- Wyświetlenia
- 2142
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Summer
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (79)Powiązane
Why buy when you can CAD. I still had to purchase the hose to carry the water to a better area away from the house.
The knob is a press-fit (at least on my printer) for an M5x25 bolt typically found in printer fastener kits. The hole is tapered slightly so use a nut to pull the bolt through.
Print in whatever filament you feel comfortable using. I picked PETG because, while I won't leave it attached, it will be stored outside with the other pool accessories.