UniFi6 Long-Range Beam Clamp Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed this Mount to be used with most common beam clamps. I needed a way to mount several of these in our Warehouse…
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 44
- Wydruki
- 1
- Wyświetlenia
- 247
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Designed this Mount to be used with most common beam clamps. I needed a way to mount several of these in our Warehouse on the steel beams.
This mount will adapt to most beam clamps. For reference I used these as my clamps - https://a.co/d/1Ntk4En
I then used M4x12 (Qty 4) screws to mount the Plate that came with the UniFi6 Long-Range access point.
For the Beam clamp I used M5x16 but you can get away with M6 I believe as well. Just depends on what beam clamp you are using. The hole is sized at 6.25mm wide.
Print Settings
Printer:
Kywoo Tycoon Slim
Rafts:
No
Supports:
Yes
Resolution:
.20
Infill:
20%
Filament:
Any PLAAny
Notes:
I just used supports on the main center hole that is touching the bed plate.
Category: Electronics