UniFi6 Long-Range Beam Clamp Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed this Mount to be used with most common beam clamps. I needed a way to mount several of these in our Warehouse…
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 44
- Makes
- 1
- Views
- 247
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Designed this Mount to be used with most common beam clamps. I needed a way to mount several of these in our Warehouse on the steel beams.
This mount will adapt to most beam clamps. For reference I used these as my clamps - https://a.co/d/1Ntk4En
I then used M4x12 (Qty 4) screws to mount the Plate that came with the UniFi6 Long-Range access point.
For the Beam clamp I used M5x16 but you can get away with M6 I believe as well. Just depends on what beam clamp you are using. The hole is sized at 6.25mm wide.
Print Settings
Printer:
Kywoo Tycoon Slim
Rafts:
No
Supports:
Yes
Resolution:
.20
Infill:
20%
Filament:
Any PLAAny
Notes:
I just used supports on the main center hole that is touching the bed plate.
Category: Electronics