Modular Organizer System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my take on the Modular Organizer System. I wanted something larger than I saw in most designs so I decided to…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 351
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is my take on the Modular Organizer System. I wanted something larger than I saw in most designs so I decided to create my own.
This system consists of 8 total interconnected modules and 8 drawers (3 bottom, 3 middle, 2 top).
I bought small antique brass knobs online that are designed for Jewelry boxes and they really work out well with the design. https://www.amazon.com/dp/B01N8UCKYS/ref=cm_sw_em_r_mt_dp_21R1VPSXFMER74EGWSYK?_encoding=UTF8&psc=1
Each module measures about 96mm (Length) x 96mm (Width) x 127mm (Deep).
I used small M4x8 bolts to connect the knobs. The Modules and Drawers fit together very snug and the drawers slide in and out very easily.
Enjoy!
Print Settings
Printer:
Tenlog TL-D3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament:
eSun PLA PRO (PLA+)Bone White
Notes:
PLA+ is awesome material to print with!
Category: 3D Printing