PiKVM Zero 2W Case (Geekworm X630)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case for the Raspberry Pi Zero 2W PiKVM with (Geekworm X630) HDMI-CSI Bridge.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 202
- Wydruki
- 0
- Wyświetlenia
- 1541
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Assuming you're using the same (Geekworm X630) HDMI-CSI bridge (https://www.amazon.com/Geekworm-Raspberry-TC358743-Supports-Compatible/dp/B09GY9M9BX/ref=sr_1_5?crid=108JRQIB50UI7&keywords=hdmi%2Bcsi&qid=1703048692&sprefix=hdmi%2Bcsi%2Caps%2C179&sr=8-5&th=1), you'll need the following:
- QTY 4: M2.5x16mm countersunk screws (you'll need to purchase these)
- QTY 2: M2.5x6mm button head screws (included with the linked HDMI-CSI bridge)
- Printed Top
- Printed Bottom
- QTY 2: Printed Tall M2.5 Spacer
- QTY 2: Printed Short M2.5 Spacer
Installation is very similar to the original model that I remixed from. The 4 countersunk screws hold the whole case together, while the 2 button head screws hold the HDMI-CSI bridge to the middle of the bottom of the case.
The short spacers go on the side with the bridge, and the long spacers go on the open side.
STEP file included for easy remixing.