Mini Spot Welder Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for cheapest spot welder anyone can buy.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 255
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
As titled, I want to make a case this spot welder to protect it from other things in the drawer.
I printed it with 0 top and bottom, 8 walls, 50% line infill for the “mesh” look. This way, the "LED" hole is technically not needed but I left it there in case others prefer solid case.
I also added heat shrink on the red cable since they're too close to the caps.
The lid is snap on. I planned on design another thing for the button, but I found that I have a box of nylon M3 screw with the standoff. Turns out, I can just use that. snip a bit of the end for the perfect fit.
PCB can be screw directly to the plastic with M3 screws. 2mm deep hole, so use 3mm screws. Or skip the screws. I don't think it's needed, just make it a tad harder to align the button.