Mini Spot Welder Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for cheapest spot welder anyone can buy.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 45
- Makes
- 0
- Views
- 255
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
As titled, I want to make a case this spot welder to protect it from other things in the drawer.
I printed it with 0 top and bottom, 8 walls, 50% line infill for the “mesh” look. This way, the "LED" hole is technically not needed but I left it there in case others prefer solid case.
I also added heat shrink on the red cable since they're too close to the caps.
The lid is snap on. I planned on design another thing for the button, but I found that I have a box of nylon M3 screw with the standoff. Turns out, I can just use that. snip a bit of the end for the perfect fit.
PCB can be screw directly to the plastic with M3 screws. 2mm deep hole, so use 3mm screws. Or skip the screws. I don't think it's needed, just make it a tad harder to align the button.