1 / 4
MikroTik CRS305 80mm snap-on fan mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Helps to cool SFP+ modules, especially when using 10Gbit Ethernet modules, e.g. MikroTik S+RJ10
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 159
- Wydruki
- 2
- Wyświetlenia
- 1228
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 8)Remiksy (1)Kolekcje (34)Powiązane
Snaps onto the switch and locks into side vent holes with small pegs.
Designed with 80mm fan and M3 brass inserts in mind. Supplied F3D file can be used to edit the fan size and brass insert holes.
Best to be printed with fan side on the plate. It should not require any supports - mounting pegs are short enough to be printed without them.