EST-PoE-32 - ESP32 PoE DevKit Case & Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case for our EST-PoE-32 DevKit board.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 307
- Wydruki
- 2
- Wyświetlenia
- 2920
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple but sturdy case for the EST-PoE-32 ESP32 PoE DevKit. It has the USB-C, Ethernet and Auxiliary power ports accessible while inside the case, plus the GPIO pins all exposed, whilst protecting the rest of the board.
There is a version with the GPIO pins labelled and a version without the GPIO pins labelled for those who prefer.
I recommend printing the base flat, but the lid printed upright with the ethernet port on the bed (see photo) so that the support lines are inside the case. I would recommend using tree supports in the middle, and using Arachne for wall generation, otherwise the text might not be readable.
Please let me know if there is any changes that need to be made, I think it all works correctly but there might be some minor things to resolve.
Thanks!