Wurkkos TS10 switch membrane
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An attempt at making the Wurkkos TS10's button feel more like that of an "o-ring modded" Lumintop FW3A's button.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 205
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
This was an attempt at making the Wurkkos TS10's button feel more like that of an "o-ring modded" Lumintop FW3A's button. It wasn't really all that successful, but it did result in a considerably stiffer, clickier button with much less travel — which may be of interest to some people, or may at least serve as inspiration for further development.
The ring is meant to be installed between the metal button and the membrane. The membrane is meant to be installed between the switch PCB and the ring, with the cylindrical portion of the membrane facing the switch PCB.
Printed in Overture 95A TPU, using an 0.6mm nozzle, on a highly modified Ender 3 Pro. Sliced with PrusaSlicer, using Arachne variable line width, and variable layer height.
The switch membrane fits very well, for me, but the models may need to be slightly re-scaled for your printer.