Garmin Force Trolling Motor Skeg
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement skeg for the Garmin Force Trolling motor
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 118
- Wydruki
- 1
- Wyświetlenia
- 1376
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is not meant as a permanent replacement for the original part, I´m sure Garmin has made the original part to certain standards. But it´s nice to have as a temporary fix until a new one arrives from Garmin. I always have a few laying around as the original skeg seems to be quite fragile.
It´s a straight bolt on part, requiring no modifications.
I´ve been using Prusament PLA, 50% infill and support, however, the bridging is minimal, I´m sure you can print it without support too.
Print time is about 3½ hours with original 0.20mm SPEED settings
Update 09.08.2021: Garmin has redesigned the original skeg to a more flexible and slimmer model, the bolts for this new skeg doesn´t fit this 3D printed model. As I remember it, the new bolts coming with the new design from Garmin is shorter. However, if you have the bolts left from the older model this will fit just fine.