yet another E3D V6 ender 3 Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this is a simple < hour mount to hold a E3D v6 on a ender 3
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 685
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
this bracket is intended to be a transitional mount for when you can print larger objects or to be your main one but i suggest having a toolhead with part cooling fan
printed on a ender 3 obviously
you will need :
- 3 M3 screws (i used M3*6 mm and *20 to clamp it)
- 1 M3 nut (on the clamp)
this is the E3D v6 clone i used :
https://www.amazon.it/distanziatore-Estrusore-Accessori-estrusore-stampante/dp/B07SJQRKGC/ref=cm_cr_arp_d_product_top?ie=UTF8
BE AWARE OF HOTEND VOLTAGE, creality V4.2.2 operates at 24V and E3D v6 usually comes with a 12V heating element, just swap it with the original one before finalizing wiring.
If that helped leave a like, I'm a broke student.