Dragonhound (Hueforge Filament Painting)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hueforge filament painting (5 colors) of a mythical creature
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 47
- Wydruki
- 1
- Wyświetlenia
- 351
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Hueforge filament painting (5 colors) of a mythical creature.
The photo shows an actual print of the model (scaled down to 130x130mm).
I like the more cartoon-ish look when printed with matte filaments - you will get smoother transitions with non-matte filaments.
For this print I used the following filaments:
- eSun PLA matte - Deep Black
- Bambu Lab matte PLA - Scarlet Red
- Extrudr PLA NX2 - Orange
- Eryone matte PLA - Yellow
- eSun PLA matte - Milky White
Other filaments that I have tried also worked well... experiment with what you have!
The following PLA filaments also work great:
- Bambu Lab Matte PLA - Charcoal
- Bambu Lab matte PLA - Dark Red (not available in the EU)
- Bambu Lab matte PLA - Mandarin Orange
- Bambu Lab matte PLA - Lemon Yellow
- Bambu Lab matte PLA - Ivory White
You will get smoother transitions with non-matte filaments.
How to print:
- Start with Black
- At layer #6 (0.44mm) swap to Red
- At layer #22 (1.08mm) swap to Orange
- At layer #30 (1.40mm) swap to Yellow
- At layer #35 (1.60mm) swap to White for the rest.
The original STL is 200 x 200 mm. If you want to scale it down, please scale only X and Y - do not scale z (height).
Print with a layer height of 0.04mm and a first layer at 0.24mm. 100% infill (aligned rectilinear), 0.4mm nozzle. I recommend the slicer/speed settings from this Youtube video by the maker of Hueforge:
https://youtu.be/CGS7Adhyz2w?t=348
As usual, first slicing can take quite a while (> 2M triangles).