Bed Side Water Bottle and Phone Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This water bottle and phone holder grips the side of a bed frame. For my purpose this holds 36oz YETI bottle and IPhoneX
- Ocena
- 0 / 5
- Polubienia
- 59
- Pobrania
- 510
- Wydruki
- 0
- Wyświetlenia
- 11 438
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution
This is a water bottle holder for the bedside frame.
My bedside frame is about 17.5mm, so i based the grip off that. This does not have any clamps or screws because I did not want to damage the bed frame; however, this should hold the water bottle well and should be resilient.
I printed a previous version with Hatchbox PLA and it worked just fine (even though it did bend a little because of the weight). I printed this version with Inland PLA+ and it seems to be working great!
The print does not need supports since the overhang on the grip is a small portion that can just be bridged. Using a small brim helps keep the print adhered to the bed.
Please let me know if you have any questions or comments, I might add some more versions.
A “Optomized” 3mf is included that cuts the print time significantly by making it 0.3 layer height and using modifiers for the infill.