Wall mounted Citadel and Vallejo paint rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two different versions of a simple wall rack that is sized for either Citadel paint pots or Vallejo dropper bottles.
- Ocena
- 5 / 5
- Polubienia
- 423
- Pobrania
- 1680
- Wydruki
- 2
- Wyświetlenia
- 7516
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
A set of wall mounted racks to hold your Citadel paint pots, or Vallejo dropper bottles. Both racks were designed to maximize the 256x256x256 build of a Bambu Labs printer, so you will need a printer at least that large. The Citadel rack holds 38 pots, and the Vallejo rack holds 85 bottles. Each rack has a 15 degree rearward tilt to keep the paints from falling out, and mounts to the wall with two screws. The mounting holes are chamfered to fit countersunk screws.
They print best face down using snug supports in the holes, but they can also be printed on the angled mounting surface if you are ok sacrificing a little bit of surface finish on the front. They are sturdy, and eat up a lot of filament, so use cheap/bulk/basic stuff if you've got it.
Please post a comment or picture of your print if you make them, I would love to see it!!