1 / 8
Bins for small parts for the Honeycomb storage wall (HSW) — zdjęcie 1
1 / 8

Bins for small parts for the Honeycomb storage wall (HSW)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A collection of bins for small parts that can be mounted on the honeycomb storage wall.

Ocena
5 / 5
Polubienia
527
Pobrania
1654
Wydruki
12
Wyświetlenia
5560
Oceny
10

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial

Here  are a number of bins for small parts for the honeycomb storage wall. The collection of bins are available in widths ranging from 40 mm to 200 mm and with bottom depths of 40 mm or 50 mm. Some of the bins have dividers to get multiple pockets. If you want several of them, it is possible to place them right next to each other.

Installation 

The bins are mounted on the honeycomb wall using a customised insert, the bins are screwed to the insert with an 10 mm long M3 screw. This provides a strong and secure attachment. I modified the insert by removing the top of the insert so that the bins could be placed flush with the honeycomb wall (and once the top was gone, all that was left was the stump, hence the name of the insert).

I have made two different versions of the insert to which the bins will be attached. One threaded for an M3 screw and the other for an M3 nut. Personally, I prefer the threaded insert. There are also two different versions of the bins, one with countersunk holes and the other with flat holes, which one to use depends on the type of screw you use. 

Printing and print settings

In the model files, the parts are orientated in the direction best suited for printing. For the best results, print the bins lying flat on the bottom and the inserts lying flat on the front.

For the bins use e.g. PLA for printing with a layer height of 0.2mm and a nozzle width of 0.4mm or less. A wall thickness of at least 3 lines and an infill of 25% or 100% if you prefer all solid walls. A support structure for the screw hole is recommended.

The insert with the M3 thread must be printed with a layer height of 0.12mm in order for the thread to be usable. The inserts for a M3 nut can be printed with a layer height of 0.2mm. Other settings can be: PLA for printing with a nozzle width of 0.4 mm or less. A wall thickness of at least 3 lines and a fill of 25%. A support structure is recommended.

 
More of my models

You might be interested in some of my other models.

 

A set of bins with a low front for the Honeycomb storage wall

 

 

 

Hook set for the Honeycomb storage wall 

 

 

 

Feedback is always a good thing.  To encourage me or other designers to make more models, hit like and/or post your makes. If something doesn't work or is missing and can be improved, please leave a comment.

Tagi