Starburst Christmas Ornament
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bold and elegant design for the Christmas tree
- Ocena
- 5 / 5
- Polubienia
- 110
- Pobrania
- 405
- Wydruki
- 2
- Wyświetlenia
- 1116
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I published this model originally on Thingiverse and Thangs a few months before joining Printables. Now that it's the Christmas time, I wanted to publish it here, too.
The photo shows my latest print of the ornament sliced with PrusaSlicer and printed with a 0.25mm nozzle. It's a different photo than I used elsewhere, but it shows the latest version of the model, which I modified slightly to slice more cleanly at the top.
I've uploaded a modified 3MF file for 0.4mm nozzles, since few use 0.25. I've also uploaded GCODE for a Prusa MK3S+. I haven't printed either, but they should work well. Aside from layer height, hot end temp, and perimeters, there's really not much different from the 0.25mm nozzle version and the 0.4mm nozzle version.
I used just 1 perimeter for most of the ornament. I've added a second perimeter in areas that need reinforcement. I use infill selectively so it has internal support just where it needs it. Adding it everywhere will make this rather heavy.