Knot ball - Tree ornament
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
There are 16 overhand knots which are bending thru each other on the sides.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 190
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
There are 16 overhand knots which are bending thru each other on the sides. I design it in Blender from single vector. And it was not easy, cos the rope should not cross others and yet, they are touching slightly. I add eye for easier hanging.
I hope you like it! Rope it!
Print it from PLA or PET/G. Classic resolution used is 0.2 or 0.25 mm.
Print it from two parts and glue them togheter or print it like one part.
Print Settings
Printer Brand:
Geeetech
Printer:
Geeetech I3ProB
Rafts:
No
Supports:
Yes
Resolution:
0.25
Infill:
10
Filament: PLA or PETG White with dots
Notes:
Print it from two parts and glue them togheter or print it like one part.
Category: Decor