Modular Electrical Receptacle Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
1,48 € – 1,80 € netto (bez VAT)
Dla pliku: AnchorPlate.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 1,64 € netto (środek widełek).
- Masa podana przez autora
- 13 g
- Czas druku podany przez autora
- 2 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Cover any type of electrical housing and receptacle with style using the modular anchor plate and decorative extenders.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 381
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
A set of modular light box cover plates that you can use for any unused electrical receptacles.
When I put potlights in my ceiling I had some old electrical boxes left. Unfortunately I could not find a cover big enough and in the style I like.
This model is a modular design focused set of prints to handle a wide array of different receptacle box shapes. I plan to add a few different decorative plates and would love community input!
Current Components
So far there are 3 separate components.
- Anchor Plate: This is the main plate that you will always need. It has holes matched to standard light electrical boxes with appropriate screw sizing. This is how you anchor the decorative (outer) plate to the ceiling or wall.
- Rounded Square Bevel: This is the first decorative plate I made. It has a slow bevel to the surface with rounded sides.
- Classical Round Bevel: This extra decorative plate is round and has a nice set of multi-level tapers that fit a more classical style.
Assembly
To assemble the items first place your anchor plate in the middle of the decorative plate making use you have the buttons inward. You should have a nice flush surface between both components. Then simply use your screws to connect to the electrical box.
Printing settings
This is a pretty simple print. I use PLA with a 20% infill, but since these are pretty thin shells and do not really need any structural strength, feel free to play around with it.
Note that there is a need for supports on the buttons and the size for the bevel on the decorative plates.
Other Notes
When I printed mine I noticed the surface was not the most brilliant after scraping the print off the build plate. I ended up using Rust-Oleum plastic paint to clean things up. Other than it being a bit tackey it worked great! https://www.amazon.ca/Rust-Oleum-249090-Painters-Purpose-12-Ounce/dp/B002BWOS08/ref=sr_1_6?hvadid=683394510375&hvdev=c&hvlocphy=9000855&hvnetw=g&hvqmt=e&hvrand=170987222406366327&hvtargid=kwd-314888044306&hydadcr=13570_13447228&keywords=rustoleum%2Bspray%2Bpaint%2Bfor%2Bplastic&qid=1703627055&sr=8-6&th=1