1 / 2
MMU3 PC4-M6 Rear Teflon Tube Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modified version to cater M6 of the pneumatic fittings for teflon/ptfe tube for the rear of the MMU3 unit. Based on R3
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 487
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
The original has about 5mm of diameter with about 1mm of surface area. This is not ideal to thread an M6 pneumatic fitting into it as it may get ripped apart so easily. There's also an inflated chamber inside there for the collet supplied by prusa.
I catered 2 different designs; threaded m6 and 5.8mm smooth bore.