Fly swatter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fly swatter to mount on a steel rod. Reasonably tough if printed with a good filament.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 383
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Wifey was tired of cheap flyswatter that were short and broke after a short time.
Made one to mount on a steel rod/tube that has a large area and has lasted a few years now.
Has started to tear at the tip but has survived much longer than any other flyswatter we have used until now.
Print without top and bottom layer, with a few perimeters and an infill pattern suitable to kill insects and remain hollow enough to reduce air resistance.
This one was printed with ninjatek armadillo, semiflexible while tough. Reguires glue to joint the parts.