Lightweight Pi Mount for Bastion Printer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple lightweight mount to attach your Raspberry/Orange/BTT Pi to your Bastion printer
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
The Bastion printer provides mounting holes for the MKS Monster8. This mount allows you to attach your single-board computer as well while leaving enough clearance at the top, bottom and between the PCBs.
There are files for the Raspberry Pi B-series (and compatible SBCs like most of the Radxa ROCK models), the Orange Pi 5 and the BTT Pi.
If you are using a different SBC, drop me a line and I'll add try to add a mount for it.
Required Hardware
4x M2.5 screws with a length of up to 10mm.
Printing Instructions
Print the mount matching your SBC and four spacers for the Monster8. Use 5 perimeters/walls if you are using a 0.4mm nozzle. You can set infill to 0%.
Updates
2024-02-27: Change the orientation for the RPi and the BTT Pi. Previously there was not enough room for a lot of USB plugs.
2024-01-01: Add model for the original Mellow Fly Pi.