Lightweight Pi Mount for Bastion Printer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple lightweight mount to attach your Raspberry/Orange/BTT Pi to your Bastion printer
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 27
- Makes
- 0
- Views
- 210
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
The Bastion printer provides mounting holes for the MKS Monster8. This mount allows you to attach your single-board computer as well while leaving enough clearance at the top, bottom and between the PCBs.
There are files for the Raspberry Pi B-series (and compatible SBCs like most of the Radxa ROCK models), the Orange Pi 5 and the BTT Pi.
If you are using a different SBC, drop me a line and I'll add try to add a mount for it.
Required Hardware
4x M2.5 screws with a length of up to 10mm.
Printing Instructions
Print the mount matching your SBC and four spacers for the Monster8. Use 5 perimeters/walls if you are using a 0.4mm nozzle. You can set infill to 0%.
Updates
2024-02-27: Change the orientation for the RPi and the BTT Pi. Previously there was not enough room for a lot of USB plugs.
2024-01-01: Add model for the original Mellow Fly Pi.