1 / 3
Mr Bullet Feeder Bracket for Frankford Arsenal X-10 — zdjęcie 1
1 / 3

Mr Bullet Feeder Bracket for Frankford Arsenal X-10

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bracket to allow mounting a Mr. Bullet Feeder collator to the FA X-10 extrusion post

Ocena
0 / 5
Polubienia
4
Pobrania
126
Wydruki
0
Wyświetlenia
1073
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial

This model allows you to mount the Mr. Bullet Feeder collator to the Frankford Arsenal X-10 using Mr. Bullet Feeder bracket, rotated downward, and the stock mounting holes on the extrusion for the Frankford Arsenal Bullet collator.

Print Settings

Set supports to on, resolution to 0.2, infill density to 25%, wall count to 6, and your top and bottom layer count to 6. 

Post-Printing

No post processing needed.  Simply remove from the printer, and you're ready to use!

Additionally, you'll need source the following hardware

  • (2) M6x55mm button head allen bolts
  • (2) M6 washers
  • (2) M6 nuts
  • (1) M6x20mm button head allen

Tagi