1 / 3
Mr Bullet Feeder Bracket for Frankford Arsenal X-10 — image 1
1 / 3

Mr Bullet Feeder Bracket for Frankford Arsenal X-10

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Bracket to allow mounting a Mr. Bullet Feeder collator to the FA X-10 extrusion post

Rating
0 / 5
Likes
4
Downloads
126
Makes
0
Views
1,073
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial

This model allows you to mount the Mr. Bullet Feeder collator to the Frankford Arsenal X-10 using Mr. Bullet Feeder bracket, rotated downward, and the stock mounting holes on the extrusion for the Frankford Arsenal Bullet collator.

Print Settings

Set supports to on, resolution to 0.2, infill density to 25%, wall count to 6, and your top and bottom layer count to 6. 

Post-Printing

No post processing needed.  Simply remove from the printer, and you're ready to use!

Additionally, you'll need source the following hardware

  • (2) M6x55mm button head allen bolts
  • (2) M6 washers
  • (2) M6 nuts
  • (1) M6x20mm button head allen

Tags