k1 bmg extruder with fs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mod of the Artis3d extruder for the k1/max.
- Ocena
- 1 / 5
- Polubienia
- 23
- Pobrania
- 120
- Wydruki
- 1
- Wyświetlenia
- 2050
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
For instructions/bom of the original Artis3d extruder check the remix links. For config changes and the filament sensor bom check out Henlor's mod https://www.printables.com/model/651002-k1-extruder-filament-runout-sensor
I've added support for low profile m3 bolts rather than fhcs (though they should still work). I've also added support for an m3x18 bolt or a 3x20mm pin for the tentioner arm pivot as I don't have any m3x28 bolts. Included is a cad model and 3mf of a simple cable chain riser that works with the “JC-Creality K1 Lid Riser” (for k1 only). An additional m3 standoff will be needed for the toolhead but with these additions I've been able to use the tophat without issue.
The m3 heatset for the tensioner spring is tricky to get to so I've made the hole loose. Screw a bolt in through the body and pull it in place while heating the end with a soldering iron.