Qidi X-Max3 Mod FilamentSensor AdaperPlate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Qidi X-Max3 FilamentRunoutSensor-90-Degree-Rotated-AdaperPlate.
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 177
- Wydruki
- 2
- Wyświetlenia
- 1052
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Qidi X-Max3 is prob the best consumer printer right now with some minor flaws. Most of them are easily fixed with some modding.
One of it is the back-mounted-filament-box/hanger. This is unpractical.
Whatever you use instead, like a IkeaDrybox standing beside, or one of the well engineered custom Filament-side-mounts. You will need the Filament Sensor rotated by 90° to pull that off.
Just mount it on the one fitting screw is not the engineers way, so i made a model that fits perfectly. There are 2 longer and 2 shorter screws with the same diameter as the original necessary though.
You will need printsupports on the overhang. Nothing else is special in this print.