Parametric Spool wheel and spacer with desiccant grid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric version of the spool holder for use with the filament dry box model - adjust every parameter you like!
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 179
- Wydruki
- 2
- Wyświetlenia
- 1659
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v2.0
Parametric spool wheel and spacer. Written in OpenSCAD - adjust inner and outer diameters, wall width, number of spokes as you like.
Set n_spokes to 0 to generate a spacer, instead of a wheel.
This model is intended for use with the filament dry box model from werner_rh.
Update 2024-9-28 [v 1.2]
Added option to configure a grid to hold desiccant in the spool's center.
Update 2023-12-27 [v 1.1]
Added holding plate to keep the spool in place. Eliminates the need for spacers on the inside.
Update 2023-12-23 [v 1.0]
Fixed an error - the outer ring was calculated too wide. I've uploaded the updated model. Please make sure to download the latest model.