Flexi-Clip (Flex filament holder)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flexibele filament clip for any spool (cardboard or plastic). Print in Place with mechanisme to adjust size.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 87
- Wydruki
- 1
- Wyświetlenia
- 674
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Flexibele filament clip for any spool (cardboard or plastic). Print in Place with mechanisme to adjust size.
- Spools from 5 cm to 7.5 cm wide (even amazon basic spools)
- 3 holes to use for more convenience
- 2 orientations, mechanisme to spool sides or flexible blades to spool sides
- ASA/ABS: Perfect for any situation including drybox.
- PETG: More flexible can be used in Drybox limited by 50 degrees Celcius
- PLA: Only use outside drybox, when deformed change the direction each time 90 degrees and it will be corrected again.
- Very strong fit, won't come loose.
- Is flexible right after print
**** U P D A T E ****
Two storage containers added, one very slim which keeps the clips in shape, the other one more elaborate but also easy to use.
3D printing settings
Print in place, No supports
Layer height : 0.2 (0.25)
Layer width : 0.4 - 0.42
First layer width: same as layer width
3 walls/perimeters
15-25% infill
Container storage Slim:
6 walls/perimeters
0,25 layer height
Have Fun
Rik