Fuzzy Skin Parameter Testing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Getting a 'feel' for different Fuzzy Skin Parameters
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 912
- Wydruki
- 2
- Wyświetlenia
- 3123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
I've been experimenting with using the Fuzzy Skin setting in Orca Slicer and have really liked the results. However, I was struggling to develop an intuitive understanding for the interactions between “Fuzzy skin point distance” and “Fuzzy skin thickness”. So this is a simple test print I created directly in Orca Slicer that varies both parameters within a grid.
The y axis varies the Fuzzy skin point distance parameter from 0.4mm up to 1.2mm in steps of 0.2mm. The x axis varies the Fuzzy skin thickness from 0.1mm up to 0.5 mm. I chose 0.5mm as the maximum because it's recommended not to exceed the outer wall line width which is my case is 0.42 and thus exceeding it by a small amount should be instructive.
I'm using a 0.4mm Nozzle and 0.2mm layer height