Fuzzy Skin Parameter Testing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Getting a 'feel' for different Fuzzy Skin Parameters
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 912
- Makes
- 2
- Views
- 3,123
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
I've been experimenting with using the Fuzzy Skin setting in Orca Slicer and have really liked the results. However, I was struggling to develop an intuitive understanding for the interactions between “Fuzzy skin point distance” and “Fuzzy skin thickness”. So this is a simple test print I created directly in Orca Slicer that varies both parameters within a grid.
The y axis varies the Fuzzy skin point distance parameter from 0.4mm up to 1.2mm in steps of 0.2mm. The x axis varies the Fuzzy skin thickness from 0.1mm up to 0.5 mm. I chose 0.5mm as the maximum because it's recommended not to exceed the outer wall line width which is my case is 0.42 and thus exceeding it by a small amount should be instructive.
I'm using a 0.4mm Nozzle and 0.2mm layer height