QAV-S JB Edition DJI Flight Unit Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This replaces the rear standoff on the QAV-S standoff to allow a DJI air unit to be mounted.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 455
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
This replaces the rear standoffs on the Lumenier QAV-S 5" Freestyle Quadcopter Frame - Joshua Bardwell Special Edition to allow a DJI air unit to be mounted.
You'll need some M3 nuts and snap/melt them into the provided nut cutouts to secure the top and bottom screws. Resulting bracket gives you enough space to mount the DJI air-unit with straight through MMCX antennas.
Result is a tight fit but everything is secure.
STL and OBJ file are included, I ran into some need to repair what OPENSCAD outputted but I successfully printed it with the OBJ file on PETG. I'll probably go back and simply the SCAD output and hopefully end up with a cleaner file.