QAV-S JB Edition DJI Flight Unit Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This replaces the rear standoff on the QAV-S standoff to allow a DJI air unit to be mounted.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 28
- Makes
- 0
- Views
- 454
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
This replaces the rear standoffs on the Lumenier QAV-S 5" Freestyle Quadcopter Frame - Joshua Bardwell Special Edition to allow a DJI air unit to be mounted.
You'll need some M3 nuts and snap/melt them into the provided nut cutouts to secure the top and bottom screws. Resulting bracket gives you enough space to mount the DJI air-unit with straight through MMCX antennas.
Result is a tight fit but everything is secure.
STL and OBJ file are included, I ran into some need to repair what OPENSCAD outputted but I successfully printed it with the OBJ file on PETG. I'll probably go back and simply the SCAD output and hopefully end up with a cleaner file.