1 / 1
Chop Toped Xol FIlament Cutter and internal filiament sensor. — zdjęcie 1

Chop Toped Xol FIlament Cutter and internal filiament sensor.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This started off as some minor changes to The Printing Shark's The Xolephant. It got out of control.

Ocena
0 / 5
Polubienia
39
Pobrania
131
Wydruki
0
Wyświetlenia
2950
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

Pretty big update.  Abandoned a lot of the previous Ideas.  integrated a filament sensor above the cutter.  I have everything printed and assembled on a mock hotend but have not tested or installed it on the printer.  You'll need M2 and M3 heat inserts and screws. For the screws, I suggest just having an assortment on hand. 5mm rod cut to 5mm length and a D2F form factor switch.  Everything is designed using standard Voron and XOL BOM hardware. 

 

My take on a filament cutter for the XOL print head.  This is based on the newer XOL files.  More information to follow.  It's a work in progress. You'll need a 6mm x 30-50mm spring. I cut the spring to get a decent return tension. I don't know about the hardware yet but the goal is to keep it in line with the Xol BOM. 

 

Tagi