Filament shelf honeycomb / hexagon style
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are filament shelf brakets with hexagon or honeycomb optics.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 288
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
These are filament shelf brakets with hexagon or honeycomb optics. After I finished them I found that they also looked a bit like large nuts.
Since the hexagon pattern is only decorative and the tubes cannot be pushed through, there is a right and a left version.
I used 20 mm aluminum tubes, the hole is a little larger, I wasn't quite sure about the print settings, but that's how it works in any case.
Screws with a diameter of up to 5 mm and a head diameter of up to 12 mm can be used for fastening.
I printed these with a 0.2 mm resolution and 30% infill with PETG.