1 / 5
Exterior Gate holder — zdjęcie 1
1 / 5

Exterior Gate holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holder to keep my yard gate open.

Ocena
0 / 5
Polubienia
7
Pobrania
34
Wydruki
0
Wyświetlenia
593
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

My yard gate has springs in the hinge that keeps the door closed wich is great most of the time but it's a real pain when you're moving stuff in and out.

I designed this stopper to keep it open when needed and so far it works great.

I printed this in its normal orientation but you could also print on its side, either way, you will definitely need some supports and yes they are a pain to remove but hey,….the part works.

Printed in PETG ….. ABS/ASA probably better…. but I didn't have any so… 

The vertical bars on my fence are 5/8 inch (approx. 16mm)

The latch rod is about 3/8 (a little under 10mm) but anything close will work.

Tagi