18500 Li-Ion Batter Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case for 2x 18500 Li-Ion batteries with slots where an optional metal strip can be inserted to connect the terminals
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 360
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A case for 2x 18500 Li-Ion batteries with slots where an optional metal strip can be inserted to connect the terminals to either create 2P or 2S configuration - or without any connection, the batteries can be used individually.
Since I didn't have any springs or spring steel, I simply used the next best thing I could find to reliably connect the terminals - nuts and screws.
All you need to make it work (appart from a 3D printer and filament) is:
- 4x M4 nut
- 4x M4x10 screw
- 1x 15x8x0.15 mm Nickle strip (optional)
Insert the Nickle strip before you insert the nuts. The nuts should have a snug fit by design - you might want to use parallel-jaw pliers to press them into place.