Bambu Lab ptfe support ( in the extruder ) for fix back filament to AMS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enhanced, tested, and permanently installed (in my setup) modification of the PTFE tube entry into the carriage part
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 97
- Wydruki
- 3
- Wyświetlenia
- 702
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Enhanced, tested, and permanently installed (in my setup) modification of the PTFE tube entry into the carriage part (extruder), preventing frustrating issues with filament retractions and print failures. Leave a like and comment if you manage to print without problems or if my modification proves effective.
NOTE: THIS MODIFICATION REQUIRES THE REMOVAL OF THE GLASS COVER OR THE IMPLEMENTATION OF A STRUCTURE LIFTING IT FROM ITS USUAL POSITION. IN MY CASE, IT IS A PCTG PRINT WITH SPACE FOR AN 8MPX CAMERA AND LEDS. IT DOES NOT WORK WHEN THE GLASS IS IN ITS STANDARD POSITION, AND IF IT DOES WORK, I ABSOLUTELY WANT TO KNOW ABOUT IT!