1 / 2
Disk Golf Retriever Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This attaches to a Dynamic Disks Trooper Disk Golf backpack and allows you to carry a Dynamic Disks Disk Retriever
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 86
- Wydruki
- 2
- Wyświetlenia
- 872
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (25)Powiązane
This attaches to the outside of a Dynamic Disks Trooper Disk Golf backpack and allows you to carry a Dynamic Disks Disk Retriever easily. There is a backplate that goes on the inside. I used 2 M4 x 12 bolts to attach the back plate and the main piece together.
Steps to assemble:
- Print both parts (Recommend PETG or something else durable)
- Insert nuts into back plate
- Test and mark location of holes
- Poke bag with an awl or something sharp
- Insert bolts through the outer piece and threw the bag
- Line up back plate and screw in
Notes:
- I used PETG for added durability
- I tried to locate the holder as far down and too the left as I could to make it as easy as possible to get the retriever out.
- Even with the bag full the internal plate doesn't get in the way when putting in a disk right next to it
- Recommend supports for the top of the tube.
- I had to bend the retriever hooks together a bit to get it to fit in the D loop
Happy Disk Golfing!