1 / 2
Disk Golf Retriever Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This attaches to a Dynamic Disks Trooper Disk Golf backpack and allows you to carry a Dynamic Disks Disk Retriever
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 86
- Makes
- 2
- Views
- 872
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
This attaches to the outside of a Dynamic Disks Trooper Disk Golf backpack and allows you to carry a Dynamic Disks Disk Retriever easily. There is a backplate that goes on the inside. I used 2 M4 x 12 bolts to attach the back plate and the main piece together.
Steps to assemble:
- Print both parts (Recommend PETG or something else durable)
- Insert nuts into back plate
- Test and mark location of holes
- Poke bag with an awl or something sharp
- Insert bolts through the outer piece and threw the bag
- Line up back plate and screw in
Notes:
- I used PETG for added durability
- I tried to locate the holder as far down and too the left as I could to make it as easy as possible to get the retriever out.
- Even with the bag full the internal plate doesn't get in the way when putting in a disk right next to it
- Recommend supports for the top of the tube.
- I had to bend the retriever hooks together a bit to get it to fit in the D loop
Happy Disk Golfing!