thumb rest for picatinny front rail on a pistol
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this projet as been design by me on solid edge. is a universal thumb rest for any pistol that have a picatinny rail.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 235
- Wydruki
- 1
- Wyświetlenia
- 1622
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Public Domain
Hi, it's my first part that i put on any site. Please be juste and gentil with my work.
first of all, it a thumb rest for pistol. i design it with solid edge 2023 and i printed on my Elegoo 4pro with PLA. No need for support. The bolt and nut that will fit on is a M4 with a allhand key head.
attention!
multiply by 2540% the scale to match the right dimension because my solid edge dont do the right scaling. i also used cura for slicing. This part take abut 28 minutes to print on my elegoo. it will be more slow ont prusa 3+, elegoo 3 max end lower.
For the bolt and nut on that part it's a M3 40mm long with a cylinder head and a 3mm soket for a allhand key. I make this correction.
i steel need to try it but with the stifness of the PLA it will not break.
thanks for you future comment and add on.
François Dubeau
