Banana Pi M1 Box Gehäuse Modelbahn / Banana Pi M1 Box Housing Model Railway
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hier ein passendes Gehäuse für den Banana Pi M1 mit Can Interface Platine zur ansteuerung der Märklin Gleisbox…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 575
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Hier ein passendes Gehäuse für den Banana Pi M1 mit Can Interface Platine zur ansteuerung der Märklin Gleisbox
05.10.20
V2 ist online mit ein paar Verbesserungen zur Montage
Modelbahn Pi
https://www.stummiforum.de/viewtopic.php?f=7&t=160500
Das Gehäuse ist so konstruiert, das alles bestückt werden kann bis auf die USB Schnitstelle zum debugging (nutze ich nicht und kenne die genaue Position nicht.
Die distanzen kommen zwischen Banana und Interface
Es werden 4 Schrauben M3x30 benötigt um den PI inklusive Interface zu befestigen.
Sollte der Klipphalter verwendet werden werden zusätzlich 4 Senkschrauben 3,5 x X benötigt
Here is a suitable housing for the Banana Pi M1 with Can Interface board for controlling the Märklin track box
05/10/20
V2 is online with a few assembly improvements
Model railway Pi
https://www.stummiforum.de/viewtopic.php?f=7&t=160500
The housing is constructed in such a way that everything can be equipped except for the USB interface
The distances come between the banana and the interface
4 M3xX screws are required to attach the PI including the interface.
If the clip holder is used, 4 countersunk screws 3.5 x X are also required
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
No
Supports:
Yes
0,16
Infill:
20%
Filament:
1,75 PLA
Category: 3D Printing