1 / 4
Banana Pi M1 Box Gehäuse Modelbahn / Banana Pi M1 Box Housing Model Railway — image 1
1 / 4

Banana Pi M1 Box Gehäuse Modelbahn / Banana Pi M1 Box Housing Model Railway

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Hier ein passendes Gehäuse für den Banana Pi M1 mit Can Interface Platine zur ansteuerung der Märklin Gleisbox…

Rating
0 / 5
Likes
2
Downloads
59
Makes
0
Views
576
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial

Hier ein passendes Gehäuse für den Banana Pi M1 mit Can Interface Platine zur ansteuerung der Märklin Gleisbox

05.10.20
V2 ist online mit ein paar Verbesserungen zur Montage

Modelbahn Pi
https://www.stummiforum.de/viewtopic.php?f=7&t=160500

Das Gehäuse ist so konstruiert, das alles bestückt werden kann bis auf die USB Schnitstelle zum debugging (nutze ich nicht und kenne die genaue Position nicht.

Die distanzen kommen zwischen Banana und Interface

Es werden 4 Schrauben M3x30 benötigt um den PI inklusive Interface zu befestigen.

Sollte der Klipphalter verwendet werden werden zusätzlich 4 Senkschrauben 3,5 x X benötigt

Here is a suitable housing for the Banana Pi M1 with Can Interface board for controlling the Märklin track box

05/10/20
V2 is online with a few assembly improvements

Model railway Pi
https://www.stummiforum.de/viewtopic.php?f=7&t=160500

The housing is constructed in such a way that everything can be equipped except for the USB interface

The distances come between the banana and the interface

4 M3xX screws are required to attach the PI including the interface.

If the clip holder is used, 4 countersunk screws 3.5 x X are also required

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

Yes

Resolution:

0,16

Infill:

20%


Filament:

1,75 PLA

Category: 3D Printing

Tags