Fan speed testing Jig (And testing results)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple fan wind tunnel to test 40mm fans wind speed with a General DAF3008 Anemometer. More for informational purposes
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 482
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Very simple fan wind tunnel to test the fans wind speed with an General DAF3008 Anemometer.
I understand this might not work for everyone (many different Anemometers out there). So i attached a step file if anyone wants to change it.
I don't expect many people to print this, but i decided to at least share my results incase it would be useful to anyone.
You should not need supports for the file. Definitely print it with a brim and at the orientation below. The holes in the model are 3mm, to fasten the fan just use some M3 bolts and they will tap their way through:
Tests Results:
| Fan | Voltage Rated | Voltage used for test | Avg Speed (m/s) |
|---|---|---|---|
Ender 3 Stock Fan (Hotend/Mainboard) 40mm x 10mm | 24V | 24V | 4.8 |
| Noctua fan 40mm x 10mm | 12V | 12V | 3.3 |
| Noctua fan 40mm x 10mm | 12V | 14V | 3.9 |
| Noctua fan 40mm x 20mm | 12V | 12V | 4.0 |
| Noctua fan 40mm x 20mm | 12V | 14V | 4.7 |