Ikea Jug Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I'm certain a lot of people have one of these hanging around and if you do the platic in the lid has almost certainly…
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 47
- Wydruki
- 2
- Wyświetlenia
- 264
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
I'm certain a lot of people have one of these hanging around and if you do the platic in the lid has almost certainly degraded by now. I made this whilst at my in-laws whilst on holiday and its still a small work in progress as it is yet to be test fitted.
Would reccomed to print in PETG for its water resistant properties and lower porosity than PLA.
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 S1 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament: SUNLU PETG White How I Designed This ===================
I grabbed the old and slightly knckered lid and measured it with an old an slightly knackered tape measure. Fortunately the tollerances are pretty slack so relatively certain it should fit.
Category: Kitchen & Dining