Plastic Razor Blade Scraper Skadis Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for the Ikea Skadis peg board to keep these cheap plastic razor blade scrapers in place.
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 267
- Wydruki
- 5
- Wyświetlenia
- 2537
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
I stopped uploading and updating my models here at Printables!
My actual models can be found on my MakerWorld profile – with print profiles.
Take care to use the newest models …
There are many scraper models here, but I prefer these cheap plastic razor blades. If you buy them there is often a simple scraper included, which works pretty well.
This is just a holder to keep it in place at a Skadis peg board.
Best printed as oriented in the stl file. Take care of good bed adhesion. If you have problems use a brim.
No support needed.
As stability junkie I used 4 walls.
I also made a model for the wall.
The holder is quite flat, so I recommend using the Skadis Lock Plug (5mm) to prevent the holder from sliding out of the pegboard holes.