1 / 3
Viper Droid Eye 1-12 scale — zdjęcie 1
1 / 3

Viper Droid Eye 1-12 scale

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

0,84 € – 1,02 € netto (bez VAT)

Dla pliku: Shape-Sphere_0.4n_0.05mm_PLA_MK4_1h23m.bgcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,93 € netto (środek widełek).

Masa podana przez autora
2 g
Czas druku podany przez autora
1,39 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Viper Droid Sensor Eye 1:12 scale

Ocena
0 / 5
Polubienia
2
Pobrania
15
Wydruki
0
Wyświetlenia
119
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Props
Licencja
Creative Commons — Attribution

 This is a replacement part for a 1:12 scale resin kit of a Viper Probe Droid from ‘The Empire Strikes Back’ I bought recently, the sensor eye was not modelled even remotely accurately so I knocked up a quick model here.  The flat disc on top is to allow you to position a hemispherical lens.  I printed in non-input shaping at ultra detail using my Prusa Mk4 standard .4 nozzle

1st photo I added shows what the ‘eye’ is supposed to look like and the second shows what is on the kit  as you can see there is some difference. I know what I have modelled up is still not right, but at this scale it’s difficult to get it to look perfect, but this will be corrected during the build far easier than what was there to begin with.   

I've also included the BGcode file - use cautiously.

Tagi