1 / 3
Viper Droid Eye 1-12 scale — image 1
1 / 3

Viper Droid Eye 1-12 scale

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€0.84 – €1.02 net (excluding VAT)

For file: Shape-Sphere_0.4n_0.05mm_PLA_MK4_1h23m.bgcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.93 excluding VAT (range midpoint).

Weight reported by the author
2 g
Print time reported by the author
1.39 hr
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Viper Droid Sensor Eye 1:12 scale

Rating
0 / 5
Likes
2
Downloads
15
Makes
0
Views
119
Reviews
0

Updated at source:

Model information

Category
Props
License
Creative Commons — Attribution

 This is a replacement part for a 1:12 scale resin kit of a Viper Probe Droid from ‘The Empire Strikes Back’ I bought recently, the sensor eye was not modelled even remotely accurately so I knocked up a quick model here.  The flat disc on top is to allow you to position a hemispherical lens.  I printed in non-input shaping at ultra detail using my Prusa Mk4 standard .4 nozzle

1st photo I added shows what the ‘eye’ is supposed to look like and the second shows what is on the kit  as you can see there is some difference. I know what I have modelled up is still not right, but at this scale it’s difficult to get it to look perfect, but this will be corrected during the build far easier than what was there to begin with.   

I've also included the BGcode file - use cautiously.

Tags