1 / 2
Strong Ivar bracket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made some changes to make it much stronger. Suggest at least 30% infill.
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 179
- Wydruki
- 2
- Wyświetlenia
- 2194
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 4)Remiksy (0)Kolekcje (73)Powiązane
The original design is great but had some flaws
I made some changes to make it much stronger. Suggest at least 30% infill.
- Moved the screw holes closer to the ends to prevent bending when on load.
- Smaller dowl hole to hold tighter