EBB36 JST Splitter for dual part cooling fans
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easily combine two fans into one for toolheads with dual part cooling fans.
- Ocena
- 5 / 5
- Polubienia
- 223
- Pobrania
- 905
- Wydruki
- 17
- Wyświetlenia
- 6235
- Oceny
- 15
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This is a splitter that turns one fan header into two. It makes it much simpler for wiring up toolheads that have two part cooling fans (Dragonburner, Xol, etc).
There are two types of the main body. One designed to fit in the space on an EBB36 CAN board where the PT100/1000 DIP switches would be for the boards that don't have the MAX31865 chip, and one designed to sit to the side for boards that do have the MAX31865 chip and DIP switches/port.
Both versions use the same inserts, and there are 2 insert options either for JST-XH (2.54mm pitch) or JST-PH (2mm pitch)
Simply slide the two JST headers into the insert, then solder wires to the connectors and crimp a JST-XH onto the end of this wire to then connect to the EBB board header.
I then use a glob of hot glue to secure the JST "insert" into the main body.
For CAD files please see my github page https://github.com/Esoterical/PrinterMods/tree/main/JST_Splitter